Datalogs
Mods: Group 1
Conditions: 70 degrees, dry, IAT's around 82
Date: 9/15/01
Mod Package 1: (changes in red)
Extreme Ported Small 16g, ported stock O2, ported stock exhaust manifold, Spearco FMIC
stock 450cc injectors, Walbro 255 FP
AFC: settings ~-10% across the board
K&N with custom cold air blockoff and RRE hard intake pipe
2.5" turbo back exhaust with 2.5" cat and warlock muffler (2.5" straight through)
Spearco FMIC
Mods: Group 1
Conditions: 70 degrees, dry, IAT's around 82
Date: 9/15/01
Comment: Note 50-70 acceleration time of 3.54 Seconds
Mods: Group 1
Conditions: 70 degrees, dry, IAT's around 82
Date: 9/15/01
Comment: I think this was a 4th gear pull.  Timing got pulled just after 5000 rpm
Mods: Group 1
Conditions: 70 degrees, dry, IAT's around 82
Date: 9/15/01
Mods: Group 1
Conditions: 70 degrees, dry, IAT's around 82
Date: 9/15/01

This page was last updated on: October 21, 2002

Mods: Group 2
Conditions: 60 degrees, dry, IAT's around 60-70
Date: 10/15/02
Logs: To view logs, you can download dsmlink viewer program (5mb) here: http://www.dsmlink.com/dsmx.exe
Log1 (220k)
Log2 (17k)
log3 (17k)
Mod Package 2: (changes in red)
RRE Ported Big 16g, unported EVO III O2 housing, ported stock exhaust manifold, ~15 psi boost
RC 550cc injectors, Walbro 255 FP
Dsmlink settings: -5% fuel across the board, +6 timing
Aquamist 1s water injection system with single .7mm nozzle tapped into throttle body elbow
K&N with custom cold air blockoff and RRE hard intake pipe
stock exhaust with cutout in downpipe (CLOSED)
Spearco FMIC
Mod Package 3: (changes in red)
RRE Ported Big 16g, unported EVO III O2 housing, ported stock exhaust manifold, ~15 psi boost
RC 550cc injectors, Walbro 255 FP
Dsmlink settings: -5% fuel across the board, +4 timing
Aquamist 1s water injection system with single .7mm nozzle tapped into throttle body elbow
K&N with RRE hard intake pipe, no cold air induction
stock exhaust with cutout in downpipe (CLOSEDf)
Supra Sidemount IC
Mods: Group 3
Conditions: 60 degrees, dry, IAT's around 80-90
Date: 10/20/02
Logs: To view logs, you can download dsmlink viewer program (5mb) here: http://www.dsmlink.com/dsmx.exe